Categories

Wholesale Categories

Trade Leads Categories

Logo Beez, Three little Bees

Mobile Nitrogen Inflation System


( Zhuhai EST M&E Equipment Co., Ltd. )



Basic Specification

color blue
Brand G5
Model Number E-0124-N2P-BAT
Power 23W
Voltage 100-240Vac
Max Pressure 151-250Psi

Detail Description

Mobile Tyre Inflation Machine Technical Data Summary

Dimensions (Height*Width*Depth)

1400mm*500mm*600mm

55.1"*19.7"*23.6"

Net Weight

26.7kg/58.7lbs

Gross Weight

38kg/83.8lbs

Packing Size(height*Width*Depth)

310mm*1420mm*510mm

12.2"*55.9"*20.1"'

Power Requirement

24Vdc(2 pcs 12Vdc internal batteries included)

100-240Vac 50 /60HZ charger included

Power Consumption

23VA

Operating Temperature Range

-20/-4°F to 70 / 158°F

Max Inlet Air/Nitrogen Supply

174PSI / 12bar / 1200kPa

Operating Range

5-174PSI/0.3-12bar/35-1200kPa

Over Pressure Setting Range

0-29PSI/0-2.0bar/0-200kPa

Nitrogen Purges

0-9

Accuracy

±1PSI/0.07bar/7kPa

Resolution

1PSI/0.1bar/5kPa

Units of Measurement

PSI/bar/kPa

Specifications

1. Adjustable over pressure setting(OPS)

2. Nitrogen purge and fill cycle (N2P)

3. Adjustable number of cycles

4. Adjustable lower purge pressure limit

5. Standard inflate to target

6. 6 air outlets allow simultaneous inflation of up to 6 tires

7. Auto-Start inflation

8. Automatic zero drift adjustment

9. Remain at last setting

10. Comprehensive diagnostics and error reporting

11. Audible and visual end of the cycle signal indicators

12. Large backlight LCD display

13. Vandal resistant mechanical switches

14. Suits Standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor

15. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck

16. Long life design, up to 2 days of average usage before recharge

Operation Steps

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

2. Connect air hose(s) to tyre valve stem(s).

3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.

FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.

4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.

 


Buying in Group to get Factory Direct Prices for this Product - Inquiry !!!

* Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.

Send your message to this manufacturer

*E-mail Address
*Description
Confirmation Code
4473