Wholesale Categories

Trade Leads Categories

Logo Beez, Three little Bees

PSA Nitrogen Inflator

( Zhuhai EST M&E Equipment Co., Ltd. )

Basic Specification

color blue
Brand G5
Model Number E-1136
Power 30W
Voltage 100-240Vac
Max Pressure 50-100Psi

Detail Description

E-1136 Nitrogen Inflator Main Features:

* Pump the air from the tyre by the internal vacuum generator before nitrogen inflation *
* Auto-Start Inflation *
* Single Tyre Application
* Suit for: Car, Light Truck

E-1136 Technical Data Summary
Dimensions (Height*Width*Depth)1255mm*700mm*435mm
Net Weight                                               87kg/191.8lbs
Gross Weight                                          104kg/229.3lbs
Packing Size (Height*Width*Depth 1380mm*730mm*510mm
Power Requirement                              100-240Vac 50/60HZ
Power Consumption                             30VA
Operating Temperature Range          -20?/-4°F to 70?/158°F
Compressed Air Input Range             87-145PSI/6-10bar /600-1000kPa
Compressed Air Input Flow                500L/min (17.0cfm)
Nitrogen Purity                                       95-99+%
Nitrogen Output                                     58L/min (2.0cfm) @116PSI/8bar/800kPa
Absorption pressure
Maximum Nitrogen Pressure in Tank

E-1136 Specifications:
1. Generates nitrogen from your compressed air
2. 2 Pre-Filters
3. 50L/13.2gal (us) internal nitrogen storage tank
4. Auto-start inflation
5. Remain at last setting
6. Audible and visual end of the cycle signal indicators
7. LED display
8. 1 Nos.*10m/32.8ft standard hose with single clip-on open tyre chuck
9. Nitrogen purity test port
10. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun
11. To increase the tyre nitrogen purity, the valve core must be removed manually and allow all the air to escape from the tyre. Before inflate tyre with nitrogen, firstly the unit will pump the residual air from the tyre by the internal vacuum generator then inflate nitrogen to the target tyre pressure

E-1136 Operation Steps:
1. Set final target pressure using the + and - buttons. The upper LED screen will show the target pressure.
2. Remove the tyre valve core to exhaust the residual air from the tyre, then re-fit the tyre valve core.
3. Connect air hose to tyre valve stem.
4. Press "START" key.
5. When unit “beeps” and the upper LED screen flashes “END”, tyre inflation is complete.

Buying in Group to get Factory Direct Prices for this Product - Inquiry !!!

* Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.

Send your message to this manufacturer

*E-mail Address
Confirmation Code